The 20mm Rubber Gym Tile is perfect for general gym areas and functional training areas where lighter weights and kettlebells may be dropped. Easy to install; these tiles lock together with hidden plastic connectors which go into the bottom of each tile to prevent any movement. No floor adhesive is required.

Sizes and Specs

• Tile Size –  1m x 0.5m x 20mm

•  Tile Weight – 8.7kg (17.4kg per m2)

• Tile Colour – Black with a 15% EPDM Grey Fleck

• Tile Material – 100% Recycled Rubber, NR SBR – Natural Rubber / Styrene-butadiene Rubber

• Base layer – 2-3mm granules

• Surface Layer –  Surface layer fine granules with 15% EPDM Grey fleck.

• Floor Hardness – is 55+/-5 ShA

• Sound Insulation – 20dB (ISO 10140-3)

• Simple Installation – Loose lay with the plastic block connector provided.

• Resistance to chemicals – good resistance to acids, alkalis and salts. Contact with oils and hydrocarbons is not advisable and will damage the floor tiles.

• Tools Required for Fitting – Stanley knife and Rubber hammer

• Cleaning – Vacuum on general setting, then lightly mop with a micro fibre mop and water mixed with a ph neutral cleaner. Do not flood the floor with water.